Best Power Supply for 3070 by Wattage and Fit

The best power supply for 3070 in this set is the Generic 200W replacement for the Dell Optiplex 3060, 5060 and 3070, because it targets the exact internal brick those small form factor desktops use and backs it with a 90-day warranty. If your 3070 is instead a graphics card in an ATX build, the MSI MAG A850GL PCIE5 at 850W with a 10-year limited warranty is the pick. Those are two completely different products, and the deciding specification is not wattage.

Best power supply for 3070 at a glance

Which 3070 do you actually have?

This is the question the whole guide turns on. "3070" names two unrelated things in computer hardware, and a search for the best power supply for 3070 returns both without warning you.

One is the Dell Optiplex 3070, a business desktop sold in three chassis sizes. Four of the seven picks here are replacement parts for that machine.

The other is a graphics card, and a card needs a full ATX unit with a PCIe connector. Two picks here are 850W ATX units.

Sort yourself in about ten seconds:

1. Look at the machine. Is there a small black box on the floor with a cable running to the back of the PC? That's a micro Optiplex, and you need an external adapter.
2. Open the side panel. Is there an internal metal box with a kettle-lead socket? That's a small form factor or tower Optiplex, and you need an internal unit.
3. Is there a large graphics card with its own power sockets? Then 3070 is the card, and you need one of the ATX units.

Get this wrong and nothing fits. An 850W ATX unit will not go inside an Optiplex small form factor case, and a 90W barrel-jack adapter cannot run a desktop graphics card. That's why the best power supply for 3070 is a different product for two different readers.

The three buyer profiles these picks map to

I screened these seven listings by asking which machine each one physically connects to, then grouped them. No pick appears in two groups, because none of them fits two groups.

• Micro Optiplex owners need the IBATTS or the BIYTC adapter. Both are rated 90W, both are external, and the deciding detail is the barrel tip diameter.
• Small form factor and tower Optiplex owners need the Generic 200W, the Forcitory 200W or the WUTIMK 300W. All three are internal replacement parts quoting Dell part numbers.
• ATX builders need the MSI MAG A850GL PCIE5 or the Thermaltake Toughpower GT. Both are 850W, both claim 80 PLUS Gold, and both list ATX 3.1 with PCIe 5.1 support.

Three groups, and the wattage figures span 90W to 850W. That range tells you how little the number alone decides. A 90W adapter is the correct part for a machine that would be destroyed by trying to run a desktop card, and an 850W unit is worthless to someone holding a dead micro brick.

Two picks publish nothing about their physical size. That matters more for internal units than external ones, and I've flagged it in each section below.

1. Generic Power Supply Fit for Dell Optiplex 3060 5060 3070 — Best overall

This is the pick that solves the most common version of the problem: a dead 200W brick inside an Optiplex 3070 small form factor desktop.

Best for: Optiplex 3070 small form factor owners with a dead 200W brick Skip it if: your machine is the micro chassis with a barrel jack

The reason this leads is coverage plus specificity. The listing names the Optiplex 3060, 5060 and 3070 along with the Inspiron 3470, and it publishes a long compatible-part list: 4FHYW, 04FHYW, CGFJT, 0CGFJT, 0X61RM, X61RM, 08KVYY, 8KVYY, plus the four housing codes H200EBS-00, L200AS-00, H200AS-00 and L200EBS-00. That's the checklist you compare against the sticker on your old unit.

It carries a 90-day warranty, which is three times what the Forcitory unit publishes and the second-longest cover among the internal picks here. Package contents are one power supply, so no cables and no screws are promised.

The seller states that the four item numbers ship randomly and all are compatible, and it warns you to compare the photo against your part before buying. Take that warning seriously rather than as boilerplate. It's the difference between a five-minute swap and a return.

Only one seller lists it, and it sits fourth of seven on price, so it isn't the cheapest route to a 200W unit. What you're paying for is the longer warranty and the fuller part list.

Pros:

• Names Optiplex 3060, 5060 and 3070 explicitly
• 90-day warranty, triple the Forcitory cover
• Eight Dell part numbers published for cross-checking
• Four compatible housing codes listed

Cons:

• No published dimensions to check clearance
• Only one seller lists it
• Fourth of seven on price despite entry-level specs
• Random part number shipping means the photo may not match

2. IBATTS 90W AC Adapter for Dell OptiPlex Micro 9020 7010 — Best upgrade

The longest-covered external adapter here, and the only one listing two barrel tip sizes.

Best for: Optiplex 3070 Micro owners who want the longest cover on an adapter Skip it if: your tower needs an internal unit

If your 3070 is the micro chassis, this is the safer of the two adapters. It publishes both 4.5 x 3.0mm and 7.4 x 5.0mm connector sizes, while the BIYTC lists only 4.5 x 3.0mm. Older Dell machines used the wider tip. That single line removes the most common cause of a returned adapter.

The warranty is 18 months exchange, the second-longest in the whole set behind the two ATX units and by far the longest among the Dell replacement parts. Weight is 0.82 lb, so it's a brick you can leave hanging behind a monitor arm without strain.

IBATTS says the adapter covers 19.5V at 2.31A for 45W as well as the higher output, and lists safety certification to CE, ROHS, FC and UL standards. Those are the manufacturer's claims, not measurements I can confirm. The compatible part list runs long: CC0DT, X9RG3, CDF57, 3RG0T, 4H6VH, D0KFY, JHJX0, JT9DM and more.

It sells faster than the rest of this set. Two sellers stock it, and it sits second-cheapest of seven. The trade-off against the BIYTC is a slightly higher price position for that extra tip size and the longer cover.

Pros:

• Two barrel tip sizes listed, 4.5 x 3.0mm and 7.4 x 5.0mm
• 18-month exchange warranty, longest among the Dell parts
• Light 0.82 lb brick
• Two sellers stock it

Cons:

• 90W ceiling rules out any tower or graphics card
• Certification claims are the seller's, not independently stated
• Costs more than the BIYTC for the same 90W rating
• No cable length published

3. BIYTC 90W 4.5mm AC Adapter for Dell Optiplex 7050 3070 — Best budget pick

The cheapest of the seven, and it's the right call when you already know your tip is 4.5 x 3.0mm.

Best for: spending the least on a 4.5x3.0mm micro replacement Skip it if: your barrel tip measures 7.4mm

Cheapest here, and the specifications are more complete than the price position suggests. Input is stated as 100 to 240V at 50 to 60Hz, output as 19.5V, and BIYTC lists 3.33A and 4.62A. Model number is DL90195462. Warranty is 360 days, which is a full year of cover on the least expensive pick in this roundup.

The compatibility list covers Optiplex 7050, 3070, 3050, 3080, 7020, 9020, 7010, 7040, 3040, 3090, 5060, 5070, 7080, 3020, 7060, 5050 and 7070 micro machines. BIYTC claims overcharge, overvoltage, overcurrent and short-circuit protection. Package includes the adapter plus a power cord, which the IBATTS listing does not confirm.

The catch is the single tip size. Only 4.5 x 3.0mm is listed, so measure your existing plug before ordering. If it's the wider 7.4mm barrel, this is the wrong part and the IBATTS is your answer.

Only one seller lists it, and it's the slower seller of the two adapters here. Against the IBATTS, you give up the second tip size and about six months of warranty to pay less.

Pros:

• Cheapest of the seven picks
• 360-day warranty on an entry-priced part
• Power cord included in the package
• Full input and output figures published

Cons:

• Only one barrel tip size, 4.5 x 3.0mm
• Shorter cover than the IBATTS adapter
• One seller only
• Protection features are seller claims, not verified

4. MSI MAG A850GL PCIE5 — Best for pros

If your 3070 is an RTX graphics card, this is the pick, and the 10-year limited warranty is the longest in the set by five years.

Best for: a full ATX build running an RTX 3070 graphics card Skip it if: you are fixing a prebuilt Dell

This and the Thermaltake are the only two picks that could power a desktop graphics card. The MSI is rated 850W, claims 80 PLUS Gold certification, and lists ATX 3.1 with PCIe 5.1 support and a native dual-colour 12V-2x6 cable. The dual-colour cable is a small thing that matters: it gives you a visual check that the connector is fully seated.

Dimensions are 4.92 x 12 x 8.75 in and the model is MAG A850GL PCIE5, released in 2022. It's fully modular, so you only run the cables your build needs.

The warranty is the headline. Ten years limited, against five from Thermaltake and 90 days or less from every Dell replacement part here. On a component that sits under load for years, that gap is the strongest single argument in this roundup.

It's the second most expensive pick, and it is not a repair part. Nothing about it fits an Optiplex chassis, so if you arrived here holding a dead Dell brick, scroll back up. Two sellers stock it.

Pros:

• 10-year limited warranty, longest in the set
• 850W with claimed 80 PLUS Gold efficiency
• Fully modular cabling
• Native dual-colour 12V-2x6 connector for seating checks

Cons:

• Second most expensive pick here
• Will not fit any Optiplex chassis
• Longest body at 12 in, tight in compact cases
• 2022 release, older than the Thermaltake

5. Thermaltake Toughpower GT 850W ATX 3.1 — Best large-capacity

Same 850W rating as the MSI in a much shorter body, which is what makes it the compact-case answer.

Best for: compact ATX cases that still need 850W Skip it if: you want the longest warranty in this set

The size difference between the two 850W units is the reason this one exists in the guide. Thermaltake lists 5.5 x 5.9 x 3.4 in against the MSI's 4.92 x 12 x 8.75 in. If your case has a shallow power supply bay, that's the deciding figure, not the wattage.

It's a 2024 release, the newest pick here, with model number PS-TPT-0850FNFAGU-3. Thermaltake claims 80 PLUS Gold efficiency up to 90%, ATX 3.1 compliance with native PCIe 12V-2x6 12+4 pin connectors, and a native 450W PCIe 5.1 connector. Smart Zero Fan technology is claimed to hold the fan still at low load, which matters if the machine sits on a desk. Fully modular with low-profile flat black cables.

Warranty is five years manufacturer, which is strong in absolute terms and half the MSI's cover. Two sellers list it, and it's third from the top on price.

Against the MSI, you gain a smaller footprint and a newer platform, and you give up five years of warranty. That's the whole trade.

Pros:

• Shortest 850W body here at 5.5 x 5.9 x 3.4 in
• Newest pick, released 2024
• Native 450W PCIe 5.1 connector claimed
• Zero-fan mode for quiet low-load running

Cons:

• Five-year warranty against MSI's ten
• No use whatsoever in an Optiplex repair
• Third most expensive pick
• 90% efficiency is a manufacturer figure, not independently stated

6. Forcitory Power Supply for Dell Optiplex 3060 5060 3070 — Best minimal setup

The only internal Optiplex unit here that publishes its dimensions, so it's the one you can check against your chassis before ordering.

Best for: checking clearance before ordering a 200W Optiplex unit Skip it if: you want more than three months of cover

Dimensions are 2.5 x 8.8 x 3.3 in. That single line is the reason this pick earns a place ahead of the WUTIMK. Neither the Generic 200W nor the WUTIMK 300W publishes a size, and an internal replacement that doesn't fit the bay is a wasted order.

The part list mirrors the Generic unit: 4FHYW, 04FHYW, CGFJT, 0CGFJT, 0X61RM, X61RM, 08KVYY, 8KVYY, plus H200EBS-00, L200AS-00, H200AS-00 and L200EBS-00. Fitment covers the Optiplex 3060, 5060 and 3070 and the Inspiron 3470. Package contains one power supply.

It's third-cheapest of the seven, so it undercuts the Generic pick. The cost of that is the warranty: three months, against 90 days from the Generic unit. That difference is small on paper, and the same random-part-number caveat applies here too.

One seller lists it. It's the pick I'd reach for if I wanted the measurements in hand before committing, and the Generic unit if I wanted the marginally longer cover and the same fitment.

Pros:

• Publishes dimensions at 2.5 x 8.8 x 3.3 in
• Third-cheapest of seven
• Full eight-item Dell part list
• Covers Optiplex 3060, 5060, 3070 and Inspiron 3470

Cons:

• Three-month warranty, shortest stated cover here
• One seller only
• No cables or mounting hardware promised
• Part numbers ship randomly, so photos may differ

7. WUTIMK 300W Power Supply for 3060 3070 3080 Tower — Best premium

The only 300W internal unit here and the only tower-specific pick, but it publishes the least of any listing in the set.

Best for: Optiplex tower owners chasing a 300W internal unit Skip it if: you need published dimensions or a stated warranty

Optiplex towers use a larger unit than the small form factor machines, and this is the only pick aimed at them. It's rated 300W and quotes part numbers 63HW7, V2KRY, W4CW3 and 352NR alongside a fitment list covering the 3060, 3070, 3080, 5090, 7070, 7080 and 7090 tower. Input is listed as 100v-240v.

That is close to everything the listing publishes, and it's the thinnest data in this roundup. The stated dimensions of 0.39 x 0.39 x 0.39 in are clearly a placeholder rather than a real measurement, so you have no usable size figure. No warranty term is given. The feature bullets repeat the title.

It's also the most expensive pick here, which is hard to square with the sparse listing. What you're buying is the specific part numbers, and those are the only thing to verify. Match 63HW7 or V2KRY against your existing unit before you order, and if your sticker shows something else, this isn't your part.

One seller lists it. I'd only choose this if the part number on my dead tower unit appeared in that list exactly.

Pros:

• Only 300W option and only tower-specific pick here
• Four Dell tower part numbers quoted
• Covers 3060 through 7090 tower models
• Input range stated as 100v-240v

Cons:

• No warranty term published
• Dimensions listed as 0.39 in cubed, which cannot be right
• Most expensive pick in the set with the fewest published specs
• Feature bullets just restate the title

How to read a Dell part number before you buy

Every internal pick here lives or dies on one string of characters. Before you order, get the number off your old unit.

Pull the side panel and find the label on the power supply body. You're looking for a code like 4FHYW, CGFJT, 0X61RM or 63HW7. Write down the housing code too, something like L200AS-00 or H200EBS-00.

Then match:

• 4FHYW, CGFJT, 0X61RM or 08KVYY with a 200W rating points to the Generic or the Forcitory unit
• 63HW7, V2KRY, W4CW3 or 352NR points to the WUTIMK 300W tower unit
• No internal unit at all, just a barrel socket on the back, points to the IBATTS or BIYTC adapter

Two of the Optiplex listings warn that item numbers ship randomly from a compatible group. That's normal for replacement parts, and it's also why both sellers tell you to compare the product photo against your own part. Do it. A number on a list is weaker evidence than a picture that matches the connector layout you're looking at.

For the two adapters, the number that matters is the barrel diameter, not the Dell code. Measure the plug on your existing adapter, or measure the socket. The 4.5 x 3.0mm and 7.4 x 5.0mm tips look similar and are not interchangeable.

What a longer warranty actually signals here

The warranty spread across these seven picks is the widest gap in the whole comparison, and it maps almost exactly onto the split between branded units and generic replacement parts.

Ranked longest to shortest:

1. MSI MAG A850GL PCIE5, 10 year limited
2. Thermaltake Toughpower GT, 5 year manufacturer
3. IBATTS 90W adapter, 18 months exchange
4. BIYTC 90W adapter, 360 days
5. Generic 200W Optiplex unit, 90 days
6. Forcitory 200W Optiplex unit, 3 month
7. WUTIMK 300W tower unit, none published

Notice the shape. The two ATX units offer years. The two adapters offer roughly a year to eighteen months. The internal Dell replacements offer three months, and one offers nothing stated at all.

That isn't a coincidence, and it isn't a reason to avoid the replacement parts. It reflects what they are: aftermarket components for machines that are already several years old. A 90-day window is enough to catch a unit that arrives faulty or fails immediately, which is when most of these fail if they're going to.

What it does mean is that among two otherwise identical Optiplex units, warranty is the tiebreaker. The Generic 200W pick beats the Forcitory on that measure, and the Forcitory answers back with published dimensions. Pick whichever of those two problems you'd rather not have.

What the listings do not tell you

Three gaps run through this set, and knowing them saves a return.

Cable and screw hardware. Both 200W Optiplex listings state the package contains one power supply. Nothing about a kettle lead, nothing about mounting screws. Your old unit's screws will almost certainly transfer, but plan on reusing them.

Physical clearance. Only the Forcitory publishes real dimensions among the internal picks. The Generic unit gives none, and the WUTIMK figure is not a usable measurement. If your case is genuinely tight, the Forcitory is the only one you can verify on paper.

Cable length on the adapters. Neither the IBATTS nor the BIYTC listing states how long the DC cable is, and neither states the length of the mains lead. For a micro machine mounted behind a monitor, that's a real variable.

Efficiency verification. Both ATX units claim 80 PLUS Gold. Thermaltake states up to 90% efficiency. Those are manufacturer figures. Treat them as the specification the brand is committing to rather than a measurement anyone independently confirmed in this data.

None of these gaps disqualifies a pick. They just tell you which questions to answer yourself before the box arrives.

The verdict

The best power supply for 3070 splits three ways, and the tier you land in is set by your machine, not your budget.

Entry tier, where most readers land: the BIYTC 90W adapter for a micro Optiplex, or the Forcitory 200W for a small form factor. Both sit at the bottom of the price ladder here, and both do exactly one job. The BIYTC's 360-day warranty is unusually generous for the cheapest pick in a set.

Middle tier: the Generic 200W internal unit and the IBATTS 90W adapter. This is where the Generic pick takes the overall award. It names the Optiplex 3070 directly, publishes eight Dell part numbers plus four housing codes, and triples the Forcitory's warranty at 90 days. The IBATTS earns its place with two barrel tip sizes and 18 months of exchange cover, which is the longest protection you'll find on a Dell replacement part here.

Premium tier: the MSI MAG A850GL PCIE5 and the Thermaltake Toughpower GT, both 850W, both for graphics card builds. MSI wins on warranty at 10 years against 5. Thermaltake wins on footprint, 5.5 x 5.9 x 3.4 in against 12 in of length. The cutoff is your case depth. Shallow bay, take the Thermaltake. Room to spare, take the MSI and the extra five years.

The WUTIMK 300W is the tower answer only if your part number matches exactly.

FAQ

Is the best power supply for 3070 worth paying more for?

Worth paying more for depends entirely on which tier you're in. Among the two 200W Optiplex units, the extra outlay on the Generic pick buys 90 days of warranty instead of three months and a fuller part list. Among the ATX units, more money buys the MSI's 10-year cover over Thermaltake's 5. The WUTIMK is the exception: most expensive, least published.

Which power supply for 3070 fits an Optiplex Micro?

Fits an Optiplex Micro means an external barrel-jack adapter, not an internal unit. Both the IBATTS and BIYTC picks are rated 90W and list the Optiplex 3070 among their compatible models. The IBATTS publishes two tip sizes, 4.5 x 3.0mm and 7.4 x 5.0mm. BIYTC lists only 4.5 x 3.0mm, so measure your existing plug first.

IBATTS or BIYTC: which 90W adapter should I buy?

Which 90W adapter to buy comes down to your barrel tip and your warranty appetite. IBATTS lists both 4.5 x 3.0mm and 7.4 x 5.0mm connectors with 18 months of exchange cover, and two sellers stock it. BIYTC is cheapest of all seven picks with a 360-day warranty and an included power cord, but a single tip size. Confirm your tip, then decide.

Will an 850W ATX unit fit inside a Dell Optiplex 3070?

An 850W ATX unit will not fit inside an Optiplex 3070. The MSI measures 4.92 x 12 x 8.75 in and the Thermaltake 5.5 x 5.9 x 3.4 in, and neither matches the proprietary bay Dell uses. Optiplex small form factor machines take a 200W internal brick. Buy the Generic or Forcitory unit instead.

What's the biggest mistake when buying a power supply for 3070?

The biggest mistake is assuming 3070 means one thing. It names both a Dell Optiplex desktop and a graphics card, and Amazon returns parts for both. Order an 850W ATX unit for an Optiplex and nothing connects. The second mistake is skipping the part number check: pull the label off your old unit before ordering anything.

Take two minutes with a screwdriver before you take two minutes with a credit card. The label on your existing power supply, or the barrel plug on your existing adapter, answers the only question that matters here. Once you know whether you're holding a 200W internal brick, a 90W micro adapter or a graphics card build, the choice collapses to one or two picks. The Generic 200W unit is the default because it addresses the most common case, an Optiplex 3070 small form factor with a dead supply, and it backs the fitment claim with a longer part list than anything else in that group.

Last updated: September 21, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.